Installing Module Into Matrix E7 Or Matrix N7 Chassis - Enterasys Diamond Distributed Forwarding Engine 7KR4297-02 Hardware Installation Manual

Installing Module into Matrix E7 or Matrix N7 Chassis

Figure 3-2 Installing Module into Matrix E7 or Matrix N7 Chassis
1 Card guides
2 Slot number 6 (left-most slot is 1)
3 Module
4 Metal back panel
3-8 Installation
5 Upper/lower locking tabs (in proper open position)
6 Upper/lower locking tab (in closed position)
7 Backplane connectors
- Top two connectors (power and FTM2)
- Bottom two connectors (power and FTM1)
(no bottom connectors in Matrix N7 chassis)