Lanview Leds - Enterasys Diamond Distributed Forwarding Engine 7KR4297-02 Hardware Installation Manual

Using LANVIEW
Figure 4-1
1 MGMT LED
2 CPU LED
Table 4‐1 describes the LED indications and provides recommended actions as appropriate.
Table 4-1 LANVIEW LEDs
LED
MGMT
4-2 Troubleshooting

LANVIEW LEDs

Note: The terms flashing, blinking, and solid used in
Flashing indicates an LED is flashing randomly.
Blinking indicates an LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid indicates a steady LED light. No pulsing.
Alternately indicates an LED is flashing in a steady rate other than 50% on, 50% off.
Color State
None Off. This module is NOT the
Management Module.
Green Solid. This module is the
designated Management
Module.
3 Port 1, RX and TX LEDs
4 Port 2, RX and TX LEDs
Table 4-1
Recommended Action
None.
None.
indicate the following: