10-Gigabit Ethernet Transceiver Specifications (Xfp; Xfp Port, Physical, And Environmental Specifications - Enterasys Diamond Distributed Forwarding Engine 7KR4297-02 Hardware Installation Manual

10-Gigabit Ethernet Transceiver Specifications (XFP)

Table A-1 Specifications (Continued)
Item
Physical
Dimensions
Approximate Weight
Predicted hours for Mean Time
Between Failures (MTBF)
Environmental
Operating Temperature
Storage Temperature
Operating Relative Humidity
10-Gigabit Ethernet Transceiver Specifications (XFP)
The 10‐Gigabit XFP (10‐Gigabit Small Form Factor Pluggable) interface port slots on
DFE‐Platinum modules can support various optional 10‐Gigabit Ethernet (10‐Gbps) standard type
fiber‐optic modules. As of the printing of this guide, 10GBASE‐LR‐XFP, ‐ER‐XFP, ‐ZR‐XFP, and ‐
SR‐XFP types are available.
Table A‐2 through Table
Table A-2 XFP Port, Physical, and Environmental Specifications
Item
2-port 10 GigaBASE
Physical Dimensions
Approximate Weight
Operating Temperature
Storage Temperature
Operating Relative Humidity
A-2 Specifications
Specification
46.43 H x 6.05 W x 29.51 D (cm)
18.28 H x 2.38 W x 11.62 D (in.)
Gross: 5.54 kg (12.0 lb) (shipping carton containing one module)
Net: 4.10 kg (9.0 lb) (one module without packaging)
For the MTBF hours for these products, refer to the MTBF web site
at http://www.enterasys.com/support/mtbf/
5°C to 40°C (41°F to 104°F)
-30°C to 73°C (-22°F to 164°F)
5% to 90% (non-condensing)
A‐4 provide specifications for each module.
Specification
Two slots support a full 10 Gbps using LR, ER, ZR, and SR compliant
XFPs.
8.5 H x 18.35 W x 78.0 L (mm)
0.34 H x 0.72 W x 3.07 L (in.)
Net: 0.34 gm (1.2 oz)
5° to 40° C (41° to 104° F)
-30° to 73° C (-22° to 164° F)
5% to 90% (non-condensing)