Appendix A: Specifications; Dfe-Diamond Module Specifications - Enterasys Diamond Distributed Forwarding Engine 7KR4297-02 Hardware Installation Manual

This appendix provides information about the following:
For information about...

DFE-Diamond Module Specifications

10-Gigabit Ethernet Transceiver Specifications (XFP)
COM Port Pinout Assignments
Regulatory Compliance
Enterasys Networks reserves the right to change the specifications at any time without notice.
DFE-Diamond Module Specifications
Table A‐1 provides the I/O ports, processors and memory, physical, and environmental module
specifications for the DFE modules.
Table A-1 Specifications
Item
7KR4297-02 Ports
Ports 1 and 2
7K4297-04 Ports
Ports 1 through 4
Processors/Memory
Processor
Dynamic Random Access Memory
(DRAM)
FLASH Memory
Specification
Port interface option slots that support 10GBASE XFP PHYs. Each
port can support a full 10 Gbps throughput with a maximum of 20
Gbps, when both ports are active at the same time.
Port interface option slots that support 10GBASE XFP PHYs. Each
port can support a full 10 Gbps throughput with a maximum of 40
Gbps, when all ports are active at the same time.
MPC750CX, 400 MHz processor
256 MB
32 MB
Matrix DFE-Platinum Series Module Installation Guide A-1
A
Specifications
Refer to page...
A-1
A-2
A-3
A-4