Table of Contents
Advertisement
14.
Close the lamp cover.
15.
Tighten the screw(s) that secures the lamp
cover.
•
Loose screw may cause a bad connection, which could
result in malfunction.
•
Do not over tighten the screw.
16.
Connect the power and restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
17.
After the startup logo, open the On-Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER.
The Lamp Settings page appears. Highlight Reset Lamp Timer. A warning
message appears asking if you want to reset the lamp timer. Highlight Reset and
press MODE/ENTER. The lamp time will be reset to "0".
Do not reset if the lamp is not new or replaced as this could cause damage.
1
2
Maintenance
51
Advertisement
Table of Contents
