Adjusting Color Registration - Dell E525w User Manual

3 Clean the CTD sensor inside the printer with a clean dry cotton swab.
4 Close the rear cover.
5 Turn on the printer.

Adjusting Color Registration

This section describes how to adjust the color registration when you first install the printer or after moving it to a
new location.
NOTE:
A password is required to enter
password you specified, and press the
Performing Auto Adjust
Auto Adjust allows you to correct the color registration automatically.
Operator Panel
1 Press the (Menu) button.
2 Press the
button until System is highlighted, and then press the
3 Press the button until Admin Menu is highlighted, and then press the
4 Press the
button until Maintenance is highlighted, and then press the
5 Press the button until Adjust ColorRegi is highlighted, and then press the
6 Ensure that Auto Adjust is highlighted, and then press the
when
Admin Menu Panel Lock Set
(Set) button.
is set to . In this case, enter the
Enable
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Maintaining Your Printer
269