Mounting An Optional Solar Panel; Swivel (Directional Facing) - Emerson ControlWave EFM 4710A Instruction Manual

2.3.9.3 Mounting an Optional Solar Panel

Solar Panels (used to charge the rechargeable lead acid batteries) are to be mounted to a 2"
to 2-3/8" pipe as illustrated in Figure 2-35. Muffler (Pipe) Clamps, utilized for this purpose,
are secured via four 1/4-20 nuts and washers.
NOTE 1: To Attach item C to item D:
Slide two bolts (A) through the top and bottom
Solar Panel (Centered) Channel Holes. Affix item
C to item D via 2 sets of item A hardware as
follows: Flat Washer, Lock Washer & Hex Nut
(Max. Torque = 120 Inch-Pounds).
A
Figure 2-35 - 30/40 Watt Solar Panel Mounting Diagram

2.3.9.3.1 Swivel (Directional Facing)

Solar Panels used in the Northern Hemisphere should face due south (not magnetic south)
while those used in the southern hemisphere should face due north (not magnetic north).
CI-ControlWave EFM
E
A
E
D
A
A
A
C
A
B
A
B
D
C
Note 2: Item D slots
accommodate Tilt
Angle Adjustment.
E C
Adjustable
Tilt Angle
A
A - 6 places consists of
the following hardware:
5/16-18 x .75 Hex Hd. Bolt
5/16 Flat Washer
5/16 Spring Lock Washer
5/16-18 Hex Nut
B
B - 2 places:
2-3/8 U-Clamp Assembly
C - Adjustable Angle Bracket
(Attaches to Solar Panel)
D - Pole Mounting Bracket
E - 30 or 40 Watt Solar Panel
Installation & Operation / 2-47
A
A
B
A
B
D
Vertical
Pole