MODEL RDO
1.1 BOX CONTENTS
Remove the analyzer from the shipping box. The ship-
ping box should contain:
•
Analyzer (1)
•
Enclosure plugs (5)
•
Dome connectors (3)
•
O-rings (6)
•
Large lock nuts (6)
•
Sealed desiccant pack (1) that will be placed in the
installed analyzer.
•
Opened desiccant pack (1) that protected the instru-
ment during shipping. Discard after opening the
analyzer.
DANGER
Only properly trained and qualified personnel
should install the RDO analyzer described in this
manual. This instrument should be installed for use
in nonhazardous locations only.
DANGER
L'installation de l'appareil "RDO" décrite dans le
guide d'utilisateur doit impérativement être réalisée
par des personnes qualifiées. L'installation de cet
appareil est seulement prescrite pour des emplace-
ments sans risques.
1.2 OPTIONAL MOUNTING KIT
The mounting kit (PN R0087560) contains the following:
•
Two stainless mounting brackets
•
Two 1½-3½ in-diameter hose clamps
•
One package containing mounting tabs (4), nuts (4),
and screws (4)
•
DIN rail mounting brackets (2)
The nuts and screws supplied with the mounting tabs
are suitable for use with the mounting brackets.
SECTION 1.0
INSTALLATION
1.3 MOUNTING OPTIONS
1.3.1 Analyzer Dimensions
•
Figure 1-1 calls out the analyzer dimensions with
the lid closed.
•
Figure 1-2 shows the depth dimensions of the ana-
lyzer. When wall or panel mounting, make sure to
allow adequate space for opening the enclosure
door or making electrical connections.
FIGURE 1-1. Analyzer dimensions with lid closed
FIGURE 1-2. Side view dimensional drawings
INSTALLATION
5