Instruction Manual
February 2015
Model ES-660-HF High Flow
Spring-Loaded Hatch
Table of Contents
Introduction .................................................................. 1
Specifications .............................................................. 2
Maintenance ................................................................ 5
Parts Ordering..............................................................6
Parts List ......................................................................6
WARNING
!
Failure to follow these instructions or
to properly install and maintain this
equipment could result in an explosion,
fire and/or chemical contamination
causing property damage and personal
injury or death.
Enardo spring-loaded hatch must be
installed, operated and maintained
in accordance with federal,
state and local codes, rules and
regulations and Emerson Process
Management Regulator Technologies
Tulsa, LLC instructions.
Failure to correct trouble could result in
a hazardous condition. Call a qualified
service person to service the unit.
Installation, operation and maintenance
procedures performed by unqualified
person may result in improper
adjustment and unsafe operation. Either
condition may result in equipment
damage or personal injury. Only a
qualified person shall install or service
the spring-loaded hatch.
P1806
MODEL ES-660-HF WITH CLOSED HATCH
P1807
MODEL ES-660-HF WITH OPEN HATCH
Figure 1. Model ES-660-HF Spring-loaded Hatch
Introduction
Scope of the Manual
This Instruction Manual provides instructions
for installation, startup, maintenance and parts
ordering information for the Model ES-660-HF
spring-loaded hatch.
www.enardo.com
Model ES-660-HF