Auto Printing - Konica Minolta bizhub C650 User Manual

Reports and Lists
Result:
OK:
S-OK:
PW-OFF:
TEL:
NG:
Cont:
No Ans:
Busy:
M-Full:
Note: One of the following is described.
L1
TMR
ORG
MIX
CSRC
PC
SP
RTX
MBX
L2
POL
FME
CALL
FWD
BND
FCODE
RLY
BUL
Note
Some items may not be described depending on the optional settings.

Auto Printing

Interval at which the communication management report is printed can be set in [Report Setting] of the Utility
mode.
!
Detail
For [Report Settings], refer to "Specifying the printing methods for report (Report Setting)" on
page 10-69.
C650
Described when communication is terminated normally.
Described when communication has stopped.
Described when operation power switch was turned OFF during communication.
Described when there is telephone call.
Described when there is communication error.
Described when there is a transmission error and that there is transition to resend
wait mode (Error page redial).
Described when there is no response from the recipient.
Described when communication is not possible as the recipient's line is busy.
Described when it is not possible to receive a fax when the fax file memory becomes
full during reception.
Main line
Timer communication
Original size specification
Mixed Original transmission
Telediagnosis
PC-FAX
Special Original
Resending
Confidential
Sub-line
Polling
Frame Erase transmission
Manual communication
Forward
Binding Position
F-code specifications
Relay
Bulletin board
11
11-5