Sequential Polling Rx Report - Konica Minolta bizhub C650 User Manual

Reports and Lists
11.6

Sequential Polling RX Report

Result of polling to multiple destinations is printed automatically.
ON/OFF can be set in [Sequential TX Report] of the Utility mode.
Destination: Any of the following is described.
- Destination name for recipients' whose destination name is registered in Address Book
- Recipient's telephone number
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints: Describes the number of sheets sent.
Result:
OK:
S-OK:
PW-OFF:
TEL:
NG:
Cont:
No Ans:
Busy:
M-Full:
Note: One of the following is described.
L1
TMR
ORG
MIX
CSRC
PC
SP
RTX
MBX
L2
POL
FME
CALL
C650
Described when communication is terminated normally.
Described when communication has stopped.
Described when operation power switch was turned OFF during communication.
Described when there is telephone call.
Described when there is communication error.
Described when there is a transmission error and that there is transition to resend
wait mode (Error page redial).
Described when there is no response from the recipient.
Described when communication is not possible as the recipient's line is busy.
Described when it is not possible to receive a fax when the fax file memory becomes
full during reception.
Main line
Timer communication
Original size specification
Mixed Original transmission
Telediagnosis
PC-FAX
Special Original
Resending
Confidential
Sub-line
Polling
Frame Erase transmission
Manual communication
11
11-14