Konica Minolta bizhub C650 User Manual page 158

Useful transmission functions
When fax multi line is installed
6
Touch [OK].
Returns to Communication Settings screen.
7
Touch [Close].
Returns to Fax/Scan screen.
8
Set other functions if required.
– For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
9
Specify the destination.
– For details on destination, refer to "Specifying only one destination" on page 2-13 and "Specifying
multiple destinations (Sequential broadcast transmission or broadcast transmission)" on page 2-22.
10
Press [Start] key.
– If the fax cannot be sent because the recipient's line is busy, the recipients number is redialed. For
details on redial, refer to "When unable to send fax" on page 2-31.
– To stop the transmission, refer to "Aborting transmission" on page 2-36.
– If the fax could not be sent, refer to "Fax cannot be sent" on page 4-2.
The scanned original is stored in the memory as a scheduled job and transmission is started.
Transmists only when the specified fax number and the number registered in the recipient's machine
match.
C650
6
6-40