Manual Reception (Telephone Only Mode); Manual Reception - Konica Minolta bizhub C650 User Manual

Reception
3.3

Manual reception (Telephone only mode)

This mode should be set when an external telephone is connected and many telephone calls are received.
This mode operates when the [Receive Mode] is set to [Manual RX] in the [Line Parameter Setting] of the
Utility mode.
Refer to "Specifying transmission/receiving mode (Line Parameter Settings)" on page 10-43 regarding
reception mode settings.
The following procedure describes operations for manual reception.

Manual reception

1
When the external telephone line rings, touch [Off-Hook] on the Fax/Scan screen.
2
Confirm that [RX] has been selected.
3
Touch the [Execute] button on the Off-Hook screen.
– When [Start] key is pressed, reception starts after touching [Yes] and then touching [OK] on the "Off-
Hook start" confirmation screen.
!
Detail
When an original is loaded in the ADF or original glass, [RX] is not highlighted even if a fax is received.
In this case, touch [RX] to highlight the button.
Note
If "Confirm Address (TX)" in Utility mode is set to "ON", [Off-Hook] does not appear.
C650
Incoming
The external phone continues ringing
Pick up the receiver and talk
3
3-4