Konica Minolta bizhub C650 User Manual page 89

To send a fax
– Touch [No] to release timer transmission settings.
7
Touch [OK] twice, and then touch [Close].
Timer TX is set, and the machine returns to the Fax/Scan screen.
8
Specify other settings if required.
– For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
9
Specify the destination.
– For details regarding specifying destinations, refer to "Specifying only one destination" on
page 2-13.
10
Press [Start] key.
– If the fax cannot be sent because the recipient's line is busy, the recipients number is redialed. For
details regarding redialling, refer to "When unable to send fax" on page 2-31.
– For aborting transmission, refer to "Aborting transmission" on page 2-36.
– If you are unable to send a fax, refer to "Fax cannot be sent" on page 4-2.
The scanned original is stored in memory as a reserved original and transmission is started at the
specified time.
C650
2
2-47