Broadcast Report - Konica Minolta bizhub C650 User Manual

Reports and Lists
11.17

Broadcast Report

Broadcast Report is printed automatically when sequential broadcast transmission is completed.
ON/OFF can be set in [Sequential TX Report] of the Utility mode. Report output timing (all destination
batches/each destination) can be specified in [Broadcast Result Report].
Destination: Any of the following is described.
- Name registered with the destination in the Address Book or in the program
- Recipient's telephone number
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints:
Describes the number of sheets sent. The sent pages and the total number of pages are described in
fractional format.
Result:
OK:
S-OK:
PW-OFF:
TEL:
NG:
Cont:
No Ans:
Busy:
M-Full:
Note: One of the following is described.
L1
TMR
ORG
MIX
CSRC
PC
SP
RTX
MBX
L2
POL
C650
Described when communication is terminated normally.
Described when communication has stopped.
Described when operation power switch was turned OFF during communication.
Described when there is telephone call.
Described when there is communication error.
Described when there is a transmission error and that there is transition to resend
wait mode (Error page redial).
Described when there is no response from the recipient.
Described when communication is not possible as the recipient's line is busy.
Described when it is not possible to receive a fax when the fax file memory becomes
full during reception.
Main line
Timer communication
Original size specification
Mixed Original transmission
Telediagnosis
PC-FAX
Special Original
Resending
Confidential
Sub-line
Polling
11
11-30