Specifying The Printing Methods For Report (Report Setting) - Konica Minolta bizhub C550 User Manual

Utility mode
10.26 Specifying the printing methods for report (Report
Setting)
The printing methods of report and paper feed tray at the time of printing re-
port are set.
Activity Report: ON*/OFF
If "ON" is selected, settings can be specified for the following.
Output Setting: Daily/Every 100 comm.*/100/daily
If "Daily" or "100/daily" is selected, settings can be specified for the follow-
ing.
Output Time Settings: 00:00 to 23:59 (9:00*)
- Select whether or not to print the Activity Report, and when to print it.
If "Daily" is selected, the report is printed every day at a fixed time.
If "100/daily" is selected, a report is printed that contains information
about the latest 100 communications that were completed since the last
report was printed. In addition, the report is printed every day at a fixed
time.
TX Result Report: ON/If TX fails*/OFF
- Whether to print the TX Result Report or not is set and when the report is
to be printed is set.
Sequential TX Report: ON*/OFF
- Whether sequential TX Report is printed or not is set.
Timer Reservation TX Report: ON*/OFF
- Whether the Timer Reservation TX report is printed or not is set.
Confidential RX Report: ON*/OFF
- Whether Confidential Reception Report is printed or not is set.
Bulletin TX Report: ON*/OFF
- Whether Bulletin TX Report is printed or not is set.
Relay TX Result Report: ON*/OFF
- Whether Relay TX Result Report is printed or not is set.
Relay Request Report: ON*/OFF
- Whether Relay Request Report is printed or not is set.
PC-FAX TX Error Report: ON/OFF*
- Whether PC-FAX sending error report is printed or not is set.
Broadcast Result Report: All Destinations*/Each Destination
- The printing methods for Broadcast Result Report are set.
- When [Each Destination] is selected, Broadcast Report is output only
when fax cannot be sent even after redialing. Report is not output when
transmission exits normally.
TX Result Report Check
- Whether or not to display the transmission report selection screen is set.
When set to [ON], it is displayed every time there is a transmission.
C550
*1
: ON/OFF*
10
10-91