Sending The Fax After Removing The Black Shadow (Frame Erase); Frame Erase - Konica Minolta bizhub C550 User Manual

Useful transmission functions
6.4 Sending the fax after removing the black shadow

(Frame Erase)

Frame Erase
When original is scanned while the ADF is open, there may be a black shad-
ow around the original at the time of scanning the booklet original and the
original may be faxed with the black shadow. Frame Erase is a function that
erases the black shadow on Top, Bottom, Right, and Left sides of the original
when a booklet is scanned.
Note
Can be used in both original glass and ADF.
The frame erase quantity can be set within a range of 0.1 - 50 mm (1/16
- 2 inch) with a scale of 0.1 mm (1/16 inch).
Initial Frame erase value at the time of procurement: 5.0 mm (3/16 inch)
Following functions cannot be used simultaneously.
Quick Memory TX, Total # of Pages, Polling RX, Bulletin board polling RX
and Long Original.
C550
Ordinary Frame erasure
transmission transmission
6
Width of
erasure
6-13