Konica Minolta bizhub C550 User Manual page 285

Registering/Specifying Settings
14
Enter Fax number of the recipient on the keypad and touch [OK].
– [Tone]: If pulse dialing is being used, touch this button to send a
push-button tone. Use Tone when fax information service is being
used. Tone is displayed as "T" on the screen.
– [Pause]: Touch this button to insert a pause when dialing. Touch
[Pause] once to insert a 1-second pause. In addition multiple paus-
es can be entered. It is displayed as "P" on the screen.
– [-]: Touch this button to insert a delimiter during dialing. It has no
effect on the dialing. It is displayed as "-" on screen.
[→]:Moves the cursor to the right.
–
[←]: Moves the cursor to the left.
–
– [Delete]: The characters before the cursor are deleted one by one.
– If "Confirm Address (Register)" in Utility mode is set to "ON", the
screen for entering the destination appears again after [OK] is
touched. Enter the fax number of the recipient, and then touch [OK]
to complete the registration.
15
Touch [Close].
16
Touch [OK].
– Touch [Cancel] to discontinue the registration.
Program destinations are registered.
17
Touch [OK].
– Return to procedure 4 to continue registration of program destina-
tions.
Returns to Fax/Scan screen.
C550
9
9-25