Sending A Fax After Specifying The Scan Size Of The Original (Scan Size); Scan Size - Konica Minolta bizhub C550 User Manual

Fk-502 fax operations

Hide thumbs Also See for bizhub C550:

Table of Contents

Useful transmission functions

Sending a fax after specifying the scan size of the

original (Scan Size)

Scan Size is a function to send the fax after specifying the scan size of the

When the paper width on the recipient's side is smaller than the paper size

of the original that is sent, the original is reduced and then printed. When the

original is not to be reduced, and the scan size is specified for the paper size

on the recepient's side, the original of the original size can be sent.

The original scanning position of an original loaded on ADF is different

from the original scanning position of an original loaded on original glass.

When Scan Size and Mixed Original setting are specified at the same

time, the size specified in Scan Size setting is applied.

Following functions cannot be used simultaneously.

Quick Memory TX, Polling RX, Total # of Pages and Bulletin board polling

Indian Ocean