Reception
3.2
Auto reception (Fax only mode)
Specify this mode when the telephone line is to be used only for faxing. Fax-
es are automatically received on detection of the set number of rings. During
reception "Receiving" is displayed on the message display part of the
screen.
Note
The message is not displayed when [RX Display] is set to [No].
This mode operates when the [Receive Mode] is set to [Auto RX] in the [Line
Parameter Setting] of the Utility mode.
Incoming
!
Detail
Refer to "Specifying transmission/ receiving mode (Line Parameter Set-
tings)" on page 10-57 regarding reception mode and settings for the
number of incoming rings.
C550
Reception starts automatically
3
Received
original
3-3