Konica Minolta bizhub C550 User Manual page 175

Fk-502 fax operations

Hide thumbs Also See for bizhub C550:

Table of Contents

Useful transmission functions

Touch [Close].

Returns to Scan Settings screen.

Returns to Fax/Scan screen.

Set other functions if required.

For details on Scan Settings, refer to "Specifying scanning condi-

tions" on page 2-12 or "Scan Settings" on page 6-2.

For details on Original Settings, refer to "Original Settings" on

For details on Communication Settings, refer to "Communication

Settings" on page 6-5.

Specify the destination.

For details on destination, refer to "Specifying only one destination"

on page 2-17 and "Specifying multiple destinations (Sequential

broadcast transmission or broadcast transmission)" on page 2-30.

Press [Start] key.

If the fax cannot be sent because the recipient's line is busy, the re-

cipients number is redialed. For details on redial, refer to "When un-

able to send fax" on page 2-41.

To stop the transmission, refer to "Aborting transmission" on

If the fax could not be sent, refer to "Fax cannot be sent" on

The scanned original is stored in the memory as a scheduled job and

transmission is started.