DataCard ImageCard Select User Manual page 86

7-6
2
3
4
5
Connect the power cord
1
Connect the serial cable to the outside printer port (Figure 7-4) if a contactless
module is installed in the printer.
Figure 7-4: Connect the smart card serial cable
Use two smart card serial cables if both ports are installed on the printer (the
smart card module contains both contactless
port) couplers).
Connect the other end of the smart card serial cable(s) to the appropriate serial
port on the PC. See information for your smart card application for the correct PC
port(s) to use.
Verify that serial port settings are correct. See "PC settings" on page C-1.
Attach the power cord to the power receptacle on the back of the printer (step 1 in
Figure 7-5).
Figure 7-5: Connect the power cord
User's Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
Inside
Outside
(inside port) and contact (outside
1
Install the printer
2