DataCard ImageCard Select User Manual page 125

3
4
5
6
User's Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
From the Ports dialog box, select the port, such as COM1 or COM2 (Figure C-3).
Figure C-3: Ports dialog box
Select the Settings button to display the port settings.
i
If the PC has more than one serial port, make sure you view the settings for
the serial port to which the printer is attached.
Figure C-4: Settings dialog box
Select the following settings:
Setting Value
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
When the settings are correct, click OK to save settings and close the dialog box.
C-9