Opening And Using The Status Monitor - DataCard ImageCard Select User Manual

3-10
Use the Help button on the Status Monitor for more information about each window.

Opening and using the Status Monitor

You can use the Status Monitor to do the following:
•
•
•
•
•
Table 3-1: Status Monitor icons
This Status Monitor
icon is white with a
white exclamation
point in a red circle.
This Status Monitor
icon is white with a
blue magnifying
glass.
The Status Monitor
icon is white with a
yellow arrow.
The Status Monitor
icon is white with a
green strip.
The Status Monitor
icon is white with a
green strip and
yellow triangle.
View Status Monitor information
Run a cleaning cycle (see "Maintaining the printer" on page 4-1)
Suspend the Status Monitor
Exit the Status Monitor
Start or quit advanced setup
User's Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers
The Status Monitor is active but is
not communicating with the
printer. The printer might be off,
cables might be loose, or a
problem might exist.
The Status Monitor is in advanced
setup mode.
E
Use advanced setup when
changing color settings,
monochrome printing intensity, or
position of printing.
The Status Monitor is running at a
network-connected client PC.
E
The Status Monitor displays
the client status and advanced
setup provides access to color
settings.
The Status Monitor is active and
communicating on a PC
connected to the printer using a
Direct Network Kit.
The Status Monitor is attempting
to communicate with a printer
attached using a Direct Network
Kit but the network is not
responding.
Using the printer driver