Picture Menu - Hitachi CP-X10000 User Manual

PICTURE menu

PICTURE menu
From the PICTURE menu, items shown in the table
below can be performed.
Select an item using the
projector or remote control, and press the
button on the projector or remote control, or the
ENTER button on the remote control to execute the ENTER
item. Then perform it according to the following table.
Item
BRIGHTNESS
CONTRAST
GAMMA
(continued on next page)
/ cursor buttons on the
Using the / buttons adjusts the brightness.
Dark Light
Using the / buttons adjusts the contrast.
Weak Strong
Using the / buttons switches the gamma mode.
To adjust CUSTOM
Selecting a mode whose name includes CUSTOM and then
pressing the button or the ENTER
you in adjusting the mode.
This function is useful when you want to
change the brightness of particular tones.
Choose an item using the
adjust the level using the
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER
Each time you press the ENTER
the pattern changes as below.
No pattern Gray scale of 9 steps
Ramp
The eight equalizing bars correspond to eight tone levels of the test
pattern (Gray scale of 9 steps) except the darkest in the left end.
If you want to adjust the 2nd tone from left end on the test pattern,
use the equalizing adjustment bar "1". The darkest tone at the left
end of the test pattern cannot be controlled with any of equalizing
adjustment bar.
• When this function is performed, lines or
other distortions may appear.
cursor
Description
ENTER button displays a dialog to aid
/ buttons, and
/ buttons.
ENTER or VIDEO VIDEO button.
ENTER or VIDEO VIDEO button,
Gray scale of 15 steps
PICTURE menu
31