Placement; Supplementary Anti-Theft Means - Hitachi CP-X10000 User Manual

Setting up

Placement

In placing the projector in place in accordance with the preceding section
"Projection distance" (
WARNING
fi re.
Do not block or cover the openings on the projector, and keep suffi ciently
space for ventilation around the projector.
• Do not use the projector on a cushiony surface such a rug, a carpet or bedding.
• Keep the projector away from any light materials such as a piece of paper that
can stick to the intake holes.
Do not use the projector on an unstable stand such as a cart.
Place the projector so that nothing enters to the inside of the projector.
• Keep the projector away from any small things such as paperclips that can fall
into the inside.
• Keep the projector away from any liquids that can spill or leak into the product.
CAUTION
such as metal.
• Do not use the projector on a metallic table.
Keep the projector away from anything that is weak in heat such as some kinds
of plastics.
NOTICE Place the projector so that there is nothing that blocks the
projection light to the screen.
Avoid exposing directly the remote sensor to any strong lights.

Supplementary anti-theft means

This projector has the security bar for a commercial
anti-theft chain or wire up to 10 mm in diameter, and
also the security slot for the Kensington lock.
For details, see the manual of your security tool.
NOTE • These are not provided as comprehensive theft
preventions but supplemental measures.
WARNING
prevent the projector from falling down, since it is not
designed for it.
CAUTION
or wire near the projector's exhaust vents, since the
chain or wire heated by the hot exhaust gas may
cause burns.
10
9) heed the following too.
Keep the projector away from anything that is easy to catch
Keep the projector away from anything that is heat conductive
Do not use the security slot to
Do not place the anti-theft chain
Security bar
Anti-theft chain or wire
Security slot