Hitachi CP-X10000 User Manual page 66

Item
SETUP
(continued)
(continued on next page)
Use the
buttons to enter the IP
ADDRESS.
This function can only be used when DHCP is set to
IP
OFF.
ADDRESS
• The IP ADDRESS is the number that identifi es this
projector on the network. You cannot have two devices
with the same IP ADDRESS on the same network.
• The IP ADDRESS "0.0.0.0" is prohibited.
Use the
buttons to enter the same
SUBNET MASK used by
SUBNET
your PC.
MASK
This function can only be used when DHCP is set to
OFF.
• The SUBNET MASK "0.0.0.0" is prohibited.
Use the
buttons to enter the
DEFAULT GATEWAY
DEFAULT
(a node on a computer network that serves as an
GATEWAY
access point to another network) address.
This function can only be used when DHCP is set to
OFF.
Use the
buttons to input the DNS
DNS
server address.
SERVER
The DNS server is a system to control domain names
and IP addresses on the Network.
Use the
the TIME DIFFERENCE.
Set the same TIME
DIFFERENCE as the one
TIME
set on your PC. If unsure,
DIFFERENCE
consult your IT manager.
Use the
to the menu after setting the
TIME DIFFERENCE.
Use the
buttons to enter the
Year (last two digits),
DATE
Month, Date, Hour and Minute.
AND
• The projector will override this setting and retrieve
TIME
DATE AND TIME information from the Time server
when SNTP is enabled. (
User's Manual - Network Guide)
Description
/ / /
/ / /
/ / /
/ / /
/ buttons to enter
button to return
/ / /
Date/Time Settings of the
NETWORK menu
57