Filter Unit - Hitachi CP-X10000 User Manual

Filter unit

To keep inside ventilation normal, keep a spare and replace the fi lter unit
periodically, although frequent replacement is not needed for this product.
To prepare the spare, contact your dealer and tell the following type number.
Type number of the optional fi lter unit: MU06351
The following walks you through the steps to replace the fi lter unit.
Make sure that the projector is
1.
unplugged and cooled down.
Use a vacuum cleaner on
2.
and around the fi lter cover.
Pick and pull up the fi lter
3.
cover knobs to take it off.
4.
Pinch and pull out the fi lter unit
knob to take it off.
Use a vacuum cleaner on and around
5.
the intake vents of the projector.
Set the new fi lter unit into the place.
6.
Put the fi lter cover back into the place.
7.
Reset the FILTER TIME value.
8.
(1) Turn the projector on.
(2)
To display the EASY MENU, press the MENU
button (on the control panel or the remote
control). On the ADVANCED MENU, select the
"EASY MENU" using the
the left column, then press the
(3) To display the FILTER TIME dialog, select the
"FILTER TIME" using the
then press the
(4) Use the
Selecting "OK" resets the FILTER TIME value.
NOTE • The value shown on the EASY menu as the FILTER TIME is the use
time that is counted since the last time the FILTER TIME was reset. Refer to
the value for proper maintenance.
• You can utilize the message function, which is set up by the item FILTER
TIME of the OPTION menu, to notify you when to replace the lamp.
WARNING
and cool down the projector.
To keep inside ventilation normal, check and replace the fi lter unit periodically.
Use only the manufacturer specifi ed type of the fi lter unit.
NOTICE Be sure to reset the FILTER TIME only when you have replaced
the fi lter unit.
/
cursor button.
cursor button according to the dialog,
Before checking or replacing the fi lter unit, turn off, unplug,
Filter cover
Filter unit knobs
cursor buttons in
cursor button.
/ cursor buttons,
Maintenance
Filter cover knobs
Intake vents
69