Hitachi CP-X10000 User Manual page 68

Item
MY IMAGE
(continued on next page)
Selecting this item displays the MY
IMAGE menu.
The application software "PJImage"
is required to store image(s) into the
projector.
Use the / buttons to select an item which is a still image by the
MY IMAGE ( MY IMAGE (Still Image Transfer) Display of the
User's Manual - Network Guide) and the
display the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
To switch the image displayed
Use the / buttons.
To return to the menu
Press the button on the remote control.
To erase the image displayed and its source fi le in the projector.
(1) Press the RESET RESET button on the
remote control while displaying an
image to display the MY IMAGE
DELETE menu.
(2) Press the button to perform to erase.
To stop erasing, press the
Description
or ENTER
button.
NETWORK menu
ENTER button to
59