Picture Menu - Hitachi CP-X300 User Manual

PICTURE Menu

PICTURE Menu
From the PICTURE menu, items shown in the table below
can be performed.
Select an item using the ▲/▼ cursor buttons, and press the
► cursor button or ENTER button to execute the item. Then
perform it according to the following table.
Item
BRIGHTNESS
CONTRAST
GAMMA
COLOR TEMP
COLOR
TINT
(continued on next page)
6
Using the ▲/▼ buttons adjusts the brightness.
Light ó Dark
Using the ▲/▼ buttons adjusts the contrast.
Strong ó Weak
Using the ▲/▼ buttons switches the gamma mode.
#1 DEFAULT � #1 CUSTOM � #2 DEFAULT � #2 CUSTOM
�
#6 DEFAULT
�
#6 CUSTOM
�
#5 DEFAULT � #5 CUSTOM � #4 DEFAULT � #4 CUSTOM
To adjust the "CUSTOM" modes, see "To adjust CUSTOM function
in GAMMA and COLOR TEMP" (28).
Using the ▲/▼ buttons switches the color temperature mode.
#1 HIGH DEFAULT � #1 HIGH CUSTOM � #2 MID DEFAULT
�
#6 Hi-BRIGHT-3 CUSTOM
�
#6 Hi-BRIGHT-3 DEFAULT
�
#5 Hi-BRIGHT-2 CUSTOM
�
#5 Hi-BRIGHT-2 DEFAULT � #4 Hi-BRIGHT-1 CUSTOM � #4 Hi-BRIGHT-1 DEFAULT
To adjust the "CUSTOM" modes, see "To adjust CUSTOM function
in GAMMA and COLOR TEMP" (28).
Using the ▲/▼ buttons adjusts the strength of whole color.
Strong ó Weak
• This item can be selected only for a video signal, s-video or
component video signal.
Using the ▲/▼ buttons adjusts the tint.
Greenish ó Reddish
• This item can be selected only for a video signal, s-video or
component video signal.
Description
#3 DEFAULT
#3 CUSTOM
�
#2 MID CUSTOM
�
#3 LOW DEFAULT
�
#3 LOW CUSTOM
�
�
�
�