Using The Magnify Feature; Temporarily Freezing The Screen - Hitachi CP-X10000 User Manual

Using the magnify feature

Press the ON ON button of MAGNIFY
1.
The "MAGNIFY" indication will appear on the screen and
the projector will go into the MAGNIFY mode. In the Magnify
mode, the picture will be zoomed. The indication will
disappear in several seconds with no operation.
Use the /
2.
area, press the POSITION
/ / / cursor buttons to move the area. And to fi nalize the zoom area,
press the POSITION POSITION button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the
OFF button of MAGNIFY OFF
The projector automatically exits from the MAGNIFY mode when the input
signal is changed or when the display condition is changed.
In the MAGNIFY mode, the keystone distortion condition may vary, it will be
restored when the projector exits from the MAGNIFY mode.
NOTE • The zoom level can be fi nely adjusted. Closely watch the screen to
fi nd the level you want.

Temporarily freezing the screen

Press the FREEZE FREEZE button on the remote control.
1.
The "FREEZE" indication will appear on the screen (however,
the indication will not appear when the OFF is selected for
the MESSAGE item in the SCREEN menu (
projector will go into the FREEZE mode, which the picture is
frozen.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE FREEZE button again.
The projector automatically exits from the FREEZE mode when some control
buttons are pressed.
If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
MAGNIFY on the remote control.
cursor buttons to adjust the zoom level. To move the zoom
POSITION button in the MAGNIFY mode, then use the
MAGNIFY on the remote control.
45)), and the
Operating
PbyP AUTO
POSITION
MY BUTTON MAGNIFY
1 3
ON
2 4
OFF
BLANK LASER
ENTER
FREEZE MENU
25