Hitachi CP-X10000 User Manual page 60

Item
SERVICE
(continued)
(continued on next page)
LENS TYPE
Select the lens type currently used using the
1:USL-801 2:SL-802
7:AUTO
Please select one of them referring to the following.
1: for an ultra short throw lens (USL-801)
2: for a short throw lens (SL-802)
3: for a short throw lens (SL-803)
4: for a standard lens (SD-804)
5: for a long throw lens (LL-805)
6: for an ultra long throw lens (UL-806)
7:AUTO
• Selecting the lens type will shift the lens to center. While the lens
is shifting, the menu will disappears and the icon of hourglass will
appears on screen. Shifting may takes some time.
• This setting has an infl uence on the keystone distortion etc.
• About the optional lens, ask your dealer.
LENS LOCK
Using the / buttons turns on/off the key lock feature. When
ON is selected, the buttons (ZOOM
MEMORY (MY BUTTON MY BUTTON)) are locked.
ON OFF
KEY LOCK
Using the / buttons turns on/off the lens lock feature. When ON
is selected, the buttons on the projector except the STANDBY/ON
button are locked.
ON OFF
• Please use this function to prevent tampering or accidental
operation. This function does not have any effect on the remote
control.
REMOTE RECEIV.
(1) Select a remote sensor using the
1:FRONT 2:TOP
(2) Switch it using the
ON OFF
• A sensor cannot be turned off when the other
two are off. Always at least one sensor is on.
REMOTE FREQ.
(1) Use the / button to change the projector's remote sensor
frequency setting (
1:NORMAL 2:HIGH
(2) Use the / button to change the
projector's remote sensor on or off.
ON OFF
The factory default setting is for both
1:NORMAL and 2:HIGH to be on. If the
remote control does not function correctly, set
the this to either only 1 or only 2 as described
in Remote Control Settings (
Neither can be turned off at the same time.
Description
3:SL-803
6:UL-806 5:LL-805
ZOOM, FOCUS FOCUS, LENS SHIFT
/
3:REAR
/ button.
17).
17).
OPTION menu
/ buttons.
4:SD-804
LENS SHIFT, LENS
STANDBY/ON
button.
51