Hitachi CP-X10000 User Manual page 52

Item
START UP
(continued on next page)
Using the / buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ORIGINAL
MyScreen
ORIGINAL
OFF
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the BLANK screen (
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
the plain black screen is instead used.
• When the ON is selected to the MyScreen PASSWORD item in
the SECURITY menu (
Description
OFF
Feature
Screen can be registered by the MyScreen item
44)
(
.
Screen preset as the standard screen.
Plain black screen.
62), the START UP is fixed to MyScreen.
SCREEN menu
26) after several
43