Easy Menu; Aspect , Auto Keystone - Hitachi CP-X10000 User Manual

EASY MENU

EASY MENU
From the EASY MENU, items shown in the table
below can be performed.
Select an item using the
projector or remote control. Then perform it according
to the following table.
Item
ASPECT
AUTO
KEYSTONE
KEYSTONE
KEYSTONE
PICTURE MODE
(continued on next page)
/ cursor buttons on the
Using the / buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (
Using the button executes the auto keystone function.
See the AUTO KEYSTONE item in SETUP menu (
Using the / buttons corrects the vertical keystone distortion.
See the KEYSTONE item in SETUP menu (
Using the / buttons corrects the horizontal keystone distortion.
See the KEYSTONE item in SETUP menu (
Using the / buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR
TEMP settings. Choose a suitable mode according to the projected
source.
NORMAL
DAYTIME
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYTIME
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is "CUSTOM". Please refer to the GAMMA and
COLOR TEMP (
• When this function is performed, lines or other distiortions may appear.
Description
CINEMA DYNAMIC
WHITEBOARD
COLOR TEMP
2 MID
3 LOW
1 HIGH
4 Hi-BRIGHT-1
5 Hi-BRIGHT-2
2 MID
6 Hi-BRIGHT-3
31, 32 ) items in PICTURE menu.
EASY MENU
34).
40).
40).
41).
BOARD(BLACK)
BOARD(GREEN)
GAMMA
1 DEFAULT
2 DEFAULT
3 DEFAULT
4 DEFAULT
4 DEFAULT
5 DEFAULT
6 DEFAULT
29