Input Menu; Progressive - Hitachi CP-X10000 User Manual

INPUT menu

INPUT menu INPUT menu
From the INPUT menu, items shown in the table
below can be performed.
Select an item using the
projector or remote control, and press the
button on the projector or remote control, or ENTER
button on the remote control to execute the item.
Then perform it according to the following table.
Item

PROGRESSIVE

VIDEO NR
3D-YCS
COLOR SPACE
(continued on next page)
36
/ cursor buttons on the
Using the / buttons switches the progress mode.
TV FILM OFF
• This function is performed only for an interlaced signal at the
VIDEO 1, VIDEO 2 VIDEO 1 VIDEO 2 or S-VIDEO
or 1080i@50/60 signal at the Component, HDMI
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select OFF, even
though the screen image may lose sharpness.
Using the / buttons switches the noise reduction mode.
HIGH MID
• This function is performed only for the VIDEO 1, VIDEO 2
S-VIDEO S-VIDEO input, and for 480i@60, 576i@50 or 1080i@50/60 signal
at the Component, HDMI
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the / buttons switches the 3D-YCS mode.
STILL MOVIE
• This function performs only at a VIDEO 1
NTSC, and PAL.
• MOVIE is the mode for images with a lot of motions like movies,
and STILL is the mode for images with few motions or completely
still ones like slides.
Using the / buttons switches the mode for color space.
AUTO RGB
• This item can be selected only for an RGB signal or a component
video signal (except 480i@60, 576i@50 and SCART RGB).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
cursor
ENTER
Description
S-VIDEO input, and for 480i@60, 576i@50
LOW
HDMI or DVI-D DVI-D input.
OFF
VIDEO 1 or VIDEO 2
SMPTE240 REC709
HDMI or DVI-D DVI-D input.
VIDEO 1, VIDEO 2 or
VIDEO 2 input of
REC601