Hitachi CP-X10000 User Manual page 48

Item
RESOLUTION
The resolution for the COMPUTER IN1, COMPUTER IN2
input signals can be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the
press the button.
The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu select the
resolution you wish to display using the
buttons.
Selecting AUTO will set a resolution
appropriate to the input signal.
(3) Pressing the or ENTER
selecting a STANDARD resolution will
automatically adjust the horizontal and
vertical positions, clock phase and horizontal
size.
The INPUT-INFORMATION- dialog (
will be displayed.
(4) To set a custom resolution use the
/ buttons to select the CUSTOM and
the CUSTOM RESOLUTION BOX will be
displayed. Set the horizontal (HORZ) and
vertical (VERT) resolutions using the
/ / / buttons.
This function is may not support all
resolutions.
(5) To save the setting place the cursor on the
right-most digit and press the
The horizontal and vertical positions, clock
phase and horizontal size will be automatically
adjusted.
After the INPUT-INFORMATION- dialog
55) has displayed for about 10 seconds
(
the screen will return to the RESOLUTION
menu displaying the changed resolution.
(6) To revert back to the previous resolution
without saving changes place the cursor on
the left-most digit and press the
The screen will then return to the RESOLUTION menu displaying the
previous resolution.
• For some pictures, this function may not work well.
Description
COMPUTER IN1, COMPUTER IN2 and BNC
/
ENTER button when
55)
button.
button.
INPUT menu
BNC
/ buttons and
39