Removing The Paper Eject Assembly - Epson STYLUS Scan 2500 Service Manual

EPSON Stylus Scan 2500
5. Remove five screws (CBS 3x6) securing the scanner support frame to the
printer mechanism frame, and remove the scanner support frame.
Remove these five screws from the
scanner support plate.
Maintenance cover open
sensor
Disassembly & Assembly
Scanner HP sensor
Option interface
Removing the Housing

4.3.6 Removing the paper eject assembly

scanner mechanism.
1. Remove the rear cover and top cover as described in "Removing the
Housing" on page 82.
2. Remove the side covers as described in "Removing the side covers" on
page 84.
3. Remove the scanner support frame as described in "Removing the
scanner support frame" on pag e84.
4. Remove three screws (CBS 4x6)
Remove one screw on the
Revision A
right side.
85