Epson STYLUS Scan 2500 Service Manual page 95

EPSON Stylus Scan 2500
When reassembling the cleaning assembly, refer to the
T
figure below.
Since the spring is included among the gears in the pump
T
assembly, be careful that the parts do not pop out during
disassembly and assembly.
When assembling the printer, be careful not to crush nor
T
leave any stress on the ink tube connecting the pump
assembly and the cap assembly.
After installing the pump assembly, make sure that the
T
cleaner parts move back and forth by rotating the gear
73.6.
Cleaner, Head
Gear arm
extension
Disassembly & Assembly
Order of assembling
the pump parts.
)
Removal of the Printer Consumables
Revision A
94