Ink Draining; Scanner Adjustment - Epson STYLUS Scan 2500 Service Manual

EPSON Stylus Scan 2500
9. After completing the adjustment, tighten the printhead screw, and
reassemble the Stylus Scan.

5.3.8 Ink draining

To drain the ink from the cartridge before transporting it a long distance,
follow the steps below.
1. Enter the Production menu as described in "Using the Service-
Adjustment Program" on pag e116.
2. On the Production menu (Figure 5-6), select Ink Discharge. Click OK in
the following dialog box.
SPECIAL MENU
To enter the Special menu, follow these steps.
1. Open the Start-up menu as described on pag e117.
2. Double-click Special and click OK.
3. Double-click Counter Clear and clice OK.
You can also perform a hex dump of the EEPROM data by
double-clicking EEPROM DUMP on the Special menu. The
printer will print the EEPROM parameters in hexadecimal
characters.
Adjustment

5.4 Scanner Adjustment

The scanner mechanism requires no adjustment for any service operation
provided you closely follow the specifications in this manual and the
instructions in Chapter 4 "Disassembly and Assembly".
Scanner Adjustment
Revision A
126