Cartridge Part number Black S020189 Color S020191 Media document cover Paper name EPSON 360 dpi Ink Jet Paper Operate button EPSON High Quality Ink Jet Paper EPSON Photo Quality Ink Jet Paper Matte Paper - Heavyweight EPSON Photo Quality Glossy...
Windows 98 only: Available USB port or hub connection, with shielded USB “AB” interface cable, from Series A (computer) to series B (EPSON Stylus Scan), up to 6.5 feet (2 m) long* Windows 95 or 98: Available parallel port with a high- speed, bidirectional, IEEE-1284-compliant parallel cable (6 to 10 feet long).The cable must have a D-SUB, 25-pin,...
Page 3
Note: Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Printable Area Single sheets (including panoramic size) and index cards The minimum top margin is 0.12 inch (3.0 mm). When printing multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin is 1.2 inches (30 mm). BL The minimum left margin is 0.12 inch (3.0 mm).
Adaptable connector Synchronization Handshaking Signal level Data transmission timing 9/99 EPSON Stylus Scan 2500 Description Based on Universal Serial Bus Specifications Revision 1.0, Universal Serial Bus Device Class Definition for Printing Devices Version 1.0 12 Mbps (full speed device) NRZI USB Series B 6.5 feet (2 meters)
Hold for Menu Return Item The LCD panel displays the current copy settings. When you first turn on the EPSON Stylus Scan, you see these default settings: . This means you’re set to 100% B&W Normal 1 produce one black and white copy, of the same size as the original document, at Normal quality (360 dpi resolution for everyday copying).
If you have an automatic document feeder, remove it from the EPSON Stylus Scan, but don’t disconnect it from the option interface. 3. Make sure the EPSON Stylus Scan is turned on and not printing. Open the document cover, and then open the maintenance cover. The internal cover opens automatically.
LCD status display panel: 1. Prepare your new ink cartridge for installation as described in “Removing and Installing Ink Cartridges” on page 8. 2. Make sure the EPSON Stylus Scan is turned on and not printing. Then open the document and maintenance covers.
Stylus Scan makes some noise and the flashes. When the light stops flashing, continue Operate with the next step. 6. Make sure paper is loaded in the EPSON Stylus Scan and click Print nozzle check pattern (Macintosh). The nozzle check pattern Confirmation prints.
5. Clean the document table with a soft, dry cloth, or with a blower brush. 6. If ink leaks inside the EPSON Stylus Scan, wipe it away with a damp cloth. Caution: Never use alcohol or thinners, and never spray lubricants inside the EPSON Stylus Scan.
Turn off the EPSON Stylus Scan, then follow these steps to clean the guide: 1. Disconnect the automatic document feeder’s connector from the EPSON Stylus Scan’s option interface. 2. Lift the automatic document feeder straight up to remove it. 3. Remove the paper support.