Tools; Specification For Screws - Epson STYLUS Scan 2500 Service Manual

EPSON Stylus Scan 2500

4.1.2 Tools

Table 4-1 lists the tools recommended for disassembling, assembling, or
adjusting the printer. Use only tools that meet these specifications.
Table 4-1. Tool List
Commercially
Tools
(+) Driver No.2
(+) Driver No.1
Tweezers
Hexagon Box Driver
(Opposite side: 5.5mm)
M3 (5.5mm) wrench
Pliers
Acetate tape
Disassembly & Assembly
Code
Available
yes B743800200
yes B743800400
yes B741000100
yes B741700100
yes -
yes -
yes -

4.1.3 Specification for Screws

Table 4-2 shows screw specifications. During assembly and disassembly,
make sure that the specified types of screws are used at proper locations,
referring to the table below. Note that the screw numbers described in the
manual correspond to the numbers in the table.
Table 4-2. Screw Characteristics
+Bind, S-tight
(CBS)
+Bind, S-tight
+Bind, P-tight
(CBP)
+Bind, P-tight
+Bind, P-tight
+Pan head
(CP)
+Bind, S-tight,
Sems R2
(CBS Sems)
Overview
Name Size
3X6
3X10
3X6
3X10
3X8
3X4
3X6
Revision A
77