Control Panel; Buttons - Epson STYLUS Scan 2500 Service Manual

EPSON Stylus Scan 2500

1.6 Control Panel

Load/
Eject
Cleaner

1.6.1 Buttons

Table 1-9. Button functions
Button
• Loads or ejects paper
Load/Eject
(pushed within • If the carriage is at the ink cartridge installation position,
two* seconds) returns the carriage back to the home position.
• Starts the ink cartridge replacement sequence (not
Load/Eject
available during printing.
(pushed for two*
Shifts the carriage to the ink cartridge replacement
seconds)
position.
• Starts the printhead cleaning cycle.
Cleaning
• If the printer is in the "Ink Low" or "Ink Out" or "No Ink
(pushed for two*
Cartridge" condition, starts the ink cartridge replacement
seconds)
sequence.
• If the carriage is at the ink cartridge replacement position,
Cleaning
returns the carriage from the ink cartridge replacement
(pushed within
position to the home position.
two* seconds)
* The user's guide states three seconds.
Product Description
Printout Size Darker/
button Lighter
Scan
Reduce/
B&W/Color
button Enlarge
Figure 1-8. Control Panel
Function
Quality
Copies
button
LCD Panel
Hold for
Return
Item
menu
button
Button
Load/Eject
Load/Eject
+
Cleaning
Button
Load/Eject
Cleaning
(hold for ten
seconds)
Control Panel
Copy
Stop/Clear
button
button
Error
indicator
S
Table 1-10. Power-on functions
Function
Prints a status sheet that includes firmware version, ink
counter, and nozzle check patterns.
Enters the special-settings mode (see table below), which
remains active for three seconds. If neither the Load/Eject
nor Cleaning button is pushed in that three seconds, normal
initialization begins.
Table 1-11. Special settings mode
Function
Resets the real-time counter (power-off time) in EEPROM
Resets the waste ink overflow counter
Revision A
Operate
indicator
23