Removing The Printer Mechanism - Epson STYLUS Scan 2500 Service Manual

EPSON Stylus Scan 2500

4.3.9 Removing the printer mechanism

1. Remove the rear cover and top cover as described in "Removing the
Housing" on pag e82.
2. Remove the side covers as described in "Removing the side covers" on
page 84.
3. Remove one screw (CBS 3x6) from the right-side frame.
Disassembly & Assembly
4. Remove two screws (CBS 4x6) and two spacers.
NOTE:
T
T
Removing the Housing
As shown in the above photos, you do not have to
remove the scanner frame or right-side frame to
remove the printer mechansim.
When replacing the printer, you need to be careful
about 1) the printer position on the base and 2) the
spacer edge must be parallel to the printer frame.
Revision A
Two screws
and spacers
88