Openning The Start-Up Menu - Epson STYLUS Scan 2500 Service Manual

EPSON Stylus Scan 2500

5.3.2 Openning the Start-up menu

1. Connect the printer and PC and turn on the printer.
2. From the Start menu, select Programs>Program for
Production>P00B01W The following screen appears.
Figure 5-4. Inital Menu
From the Startup menu you need to choose Head ID or Production depending
on the adjustment procedure you perform. See the table below for details.
Adjustment
Adjustment procedure
Input the head voltage
Charge ink
Adjust normal Bi-d
Adjust variable Bi-d
Clean the printhead
Drain ink
Reset EEPROM
Clear ink counter
The following table gives a list of adjustment that are available on the service-
related menus. Other menus and items are for production purposes only.
Head ID Menu
Production Menu
Special
HEAD ID MENU
To enter the Head ID menu, follow these steps.
Using the Service-Adjustment Program
Table 5-4. Software-based Adjustment Procedures
See
"Head ID Menu" on
page 117
"Production Menu"
on page 120
Special
Table 5-5. Service Menu Items
Menu name Operations available
Input Head ID
Input the head voltage
T
Charge ink
T
Adjust normal Bi-d
T
Adjust variable Bi-d
T
Clean the printhead
T
Drain ink
T
Reset EEPROM
T
Clear ink counter
T
Revision A
Then see
"Head Voltage ID Input" on
page 124
"Initial Ink Charge Operation"
on pag e122
"Bi-D Adjustment" on
page 122
"Head Cleaning Operation"
on pag e123
"Ink draining" on pag e126
117