Chain Play Function - Fostex D2424LVmk2 Reference Manual

"Chain play" functions to playback, in any order, the tunes recorded on a multiple number of
programs. There are three modes of chain play and each operates as shown below.
Before executing these modes, "AUTO RTN START point" and "AUTO RTN END point" must be set for
each program. For details, please read the explanations starting from the next page.
AUTO RTN START point
STOP
PGM 02
AUTO RTN START point
PGM 05
AUTO RTN START point
STOP
PGM 01
AUTO RTN START point
STOP
PGM 02
AUTO RTN START point
PGM 05
AUTO RTN START point
PGM 01
AUTO RTN START point
PGM 02
AUTO RTN START point
PGM 05
AUTO RTN START point
PGM 01
Model D2424LVmkII Reference Manual (Chain Play function)

Chain Play function

AUTO RTN END point
Playback
STOP
Playback
AUTO RTN END point
Playback
AUTO RTN END point
Playback
Playback
AUTO RTN END point
Playback
AUTO RTN END point
Playback
Playback
AUTO RTN END point
Playback
<Pause mode>
In the pause mode, as shown in the
example on the left, upon reaching the
"END point" at playback of program 02,
the recorder automatically stops at the
"START point" of program 05 which is to
be played back next.
AUTO RTN END point
If chain play is executed again at the
stopped point, it will stop again at the
next program 10 "START point."
<Auto Play mode>
In the auto play mode, as shown in the
example on the left, upon reaching the
"END point" of program 02 started in
playback, the recorder will automatically
playback in setup order between the
"START points - END points," and, at the
AUTO RTN END point
moment playback is finished at the "END
point" of the last program 01, stops at the
"START point" of the first program.
<Repeat mode>
In the repeat mode, playback is repeated
until the above auto play mode is
canceled.
<Note>:
switched on again while set to the Repeat
AUTO RTN END point
mode, playback will automatically start from
the first program.
61
If power is switched off and then