Soft Keys - Raymarine hsb2 series Owner's Handbook Manual

Hide thumbs Also See for hsb2 series:
Table of Contents

Advertisement

1-18
• Press: Press the key momentarily and then release it. This method is used
for most key operations.
• Press and hold: Press the key and hold it down for the length of time stated
(for example, 3 seconds), and then release it.
When you press a dedicated key, one of the following happens:
i. The associated operation is performed, e.g., change chart scale
ii. A pop-up menu is displayed, providing further options.
iii. A set of soft keys is displayed, providing further functions.
As you press a key, a single audio beep confirms the key action. If the key-
press is not valid for the current screen or mode, three rapid beeps sound to
indicate that no response is available. If required, you can turn the key beeps
off as part of your set up procedure (see Chapter 7).

Soft Keys

The four keys below the screen are called soft keys because their functions
change according to the operation. The soft keys are grouped into related sets
and subsets providing access to the various functions. The soft key labels are
displayed on the screen just above the keys. The default soft keys are displayed
until you press a key, or select an item on the screen; the soft keys associated
with the action are then displayed.
The currently-selected soft key option is shown by its green background (gray
for the L755RC Plus monochrome display). If the key text is displayed in gray
rather than in black, it is not currently available.
When you press a soft key one of the following happens:
i. The associated operation is performed, e.g., 50 kHz.
ii. A sub-set of soft keys is displayed, providing further functions.
iii. A pop-up menu is displayed, providing further options.
As with dedicated keys, when you press a soft key a single audio beep
confirms the key action. If the key-press is not valid for the current screen or
mode, three rapid beeps sound to indicate that no response is available. If
required, you can turn the key beeps off as part of your set up procedure (see
Chapter 7).
(RANGE).
hsb
Series Fishfinders
2
D5013-1

Advertisement

Table of Contents
loading

Table of Contents