Erasing A Waypoint - Raymarine hsb2 series Owner's Handbook Manual

5-14
Using the ST80 Navigator Keypad to edit the name:
i. Use the left or right arrows of the Navigator's keypad to move the cur-
ii. Use the up and down arrow keys to scroll through the characters.
When you have finished editing the name, to remove the window, press
ENTER to save the name or CLEAR to cancel the operation. The waypoint
name replaces the waypoint number.
Press ENTER or CLEAR to return to the default soft keys.
5. To edit the waypoint position, press the EDIT WAYPOINT soft key, followed
by POSITION. The Waypoint Position pop-up is displayed.
EDIT
WAYPOINT
Use the soft keys to select LAT, LON, BRG or RNG.
Using the trackpad to edit the value:
i. Use the left or right side of the trackpad to move the cursor to the char-
ii. Use the top or bottom of the trackpad to scroll through the characters.
iii. Adjust each parameter until the waypoint position is correct.
Using the ST80 Navigator Keypad to edit the value:
i. Use the left or right arrows of the Navigator's trackpad to move the cur-
ii. Use the up and down arrow keys to scroll through the characters.
iii. Adjust each parameter until the waypoint position is correct.
When you have finished editing the position, press ENTER to save the position
or CLEAR to cancel the operation.
Press ENTER or CLEAR again, the Waypoint Position window is removed
from the screen and the default soft keys are displayed.

Erasing a Waypoint

You cannot erase the target waypoint or waypoints that are used in routes.
However, you can remove a waypoint from the current route - see Editing a
Route on page 5-26.
If you try to erase a waypoint that is used in a saved route you are warned
"WAYPOINT IS USED IN A ROUTE & CANNOT BE DELETED"
sor to the character you wish to change.
or
Use the alphanumeric keypad to change the character, as described in
Using the ST80 Navigator Keypad on page 5-16
acter you wish to change.
sor to the character you wish to change.
or
Use the alphanumeric keypad to change the character. Press the def/2
key for East, mn/5 for North, rst/7 for South, and uvw/8 for West.
hsb Series Fishfinders
2