Waypoints; Placing A Waypoint - Raymarine hsb2 series Owner's Handbook Manual

Chapter 4: Fishfinder Operations

4.6 Waypoints

The MARKS key lets you to place up to 998 waypoints. A waypoint is a
MARKS
position, normally entered on a chart as a reference, or as a place to go to.
However, the
L760RC Plus, and L1250RC Plus) let you place waypoints in Fishfinder mode
as well as Chartplotter mode.
Waypoints are described fully in Chapter 5. This section provides details that
are specific to placing Waypoints in Fishfinder mode.
A waypoint can be placed at the cursor position or at the vessel's current
position (this is sometimes known as an event mark); all waypoints placed on
the Fishfinder are stored in a waypoint database list with position, depth and
temperature when it was placed.
Waypoints placed on the Fishfinder are displayed as a solid vertical line on the
scrolling bottom, Zoom and Bottom Lock displays. The waypoint number is
shown at the top of the vertical line. The waypoint scrolls to the left with the
scrolling bottom display.
If you place a waypoint at the cursor position in Fishfinder mode, and a chart
window is open, the waypoint is displayed on the chart. You can GOTO, EDIT
and ERASE a cursor waypoint.
Note: When in chart mode, if you place a waypoint at the cursor position, it is
not shown on the Fishfinder display.
If you place a waypoint at the vessel position in Fishfinder mode it is shown in
the chart window.

Placing a Waypoint

To access the place waypoint soft keys, press MARKS:
PLACE WPT
MARKS
AT CURSOR
To place a waypoint at the cursor position or at the vessel position:
1. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL soft
key. The waypoint is added to the waypoint list and tagged using the next
available number.
2. Press CLEAR or ENTER to remove the place waypoint soft keys.
hsb Series units with Raychart functionality (L755RC Plus,
2
PLACE WPT WAYPOINT
AT VESSEL LIST
4-11
D4169-1