Selecting A Waypoint - Raymarine hsb2 series Owner's Handbook Manual

Chapter 5: Standard Chart Operations
ii. The ASF1/ASF2 soft key, which presents two soft keys for editing ASF 1
iii. The SET TD 1 and SET TD 2 soft keys, which enable editing of each TD's
Note: Except for the CHAIN setting, parameters are edited using the trackpad
as described in Editing the Waypoint Details on page 5-13.
4. When editing is complete, press the ENTER key to save the waypoint or
CLEAR to cancel the operation; the display returns to the New Waypoint
screen.
Press the ENTER or CLEAR to return to the Waypoint List.

Selecting a Waypoint

Positioning the cursor over a waypoint selects that waypoint and accesses the
waypoint soft keys. These keys enable you to GOTO (described in Section 5.5),
EDIT (symbol, name, position), ERASE or MOVE the waypoint.
Selecting a waypoint from the List allows you to GOTO and EDIT (symbol,
name, position, erase) the waypoint. The Waypoint List also provides options
to make a new waypoint and transfer waypoints.
WPT POSITION (LORAN TDs)
and ASF 2 parameters independently:
parameters independently.
5-11