Chartplotter Display Options - Raymarine hsb2 series Owner's Handbook Manual

Chapter 1: Overview

Chartplotter Display Options

Set up options allow you to customize the chart by choosing what is displayed
(including cartographic features), how it is displayed (including language and
units), heading mode and how the chartplotter operates with other
You can also view the cursor position and a variety of data from other
equipment (for example, speed, heading, depth, wind, and tide information) in
a set of user-selectable data boxes. The cursor box and user-selected data
boxes can be moved around the screen and they can be turned on or off.
Display options are provided in System Set Up and Chart Set Up as described
in Chapter 7. In addition Screen Presentation Options, described in Chapter 3
are provided to switch:
• Cursor Box and Databoxes On/Off
• Chart Grid On/Off
• Custom Chart Details On/Off
Note: When you turn the display off and on again, these settings are retained
in memory.
Chart Range
Chart Boundary
Waypoint
Object data box -
for object selected
by cursor
Figure 1-4:
Default soft key labels
These can be turned off: press any soft key to redisplay them.
Different labels are displayed when you press a key.
Typical Chartplotter Display
1-13
units.
hsb 2
Status Bar
Vessel Position
Cursor -
selecting chart object
Depth Area
Cursor position box
Shows the current
cursor position as
either Range/Bearing
or Lat/Long. You can
move this box to your
preferred position on
the screen or turn it off.
D4275-3